Fuel and Lubricant Testing

alcor

phoenix 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

Search for More Testing Here

ISO 6245 - Ash Content

We perform testing by ISO 6245 to determine ash content in petroleum products. Measuring the ash-forming material present in a petroleum product can provide information as to whether or not the product is suitable for use in a given application. Ash can result from contamination such as oil or water-soluble metallic compounds or from solids such as dirt and rust.

Ash by ISO 6245 determines the ash in distillate and residual fuels, gas turbine fuels, crude oils, lubricating oils, waxes, and other petroleum products, in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants.

We also perform ash testing by ASTM D482ASTM D874ASTM E2403DIN 51575, and IP 4. These different test methods use different instruments or procedures or are used for certain sample types. Click on the test method number to learn more about each test.

ISO 6245 corresponds to ASTM D482 and IP 4.

You can learn more about this test standard, or purchase a copy, by going to the website for ISO - the International Organization for Standardization.